Home | Animals | Pets
There is little in life as pleasing as the beauty of a fully outfitted, custom made saltwater aquarium and the aquatic residents that make it their home. The process of purchasing an aquarium is an easy one for many-after all, there are so many choice for the decorating of such a thing that they seem to be almost endless-but the process for establishing maximum utility and making the aquarium livable for its new residents is a bit more complicated. The truth is that while the nitrogen cycling process is a complex one it is not by any means impossible for the average citizen to understand. James Kostich of Aquatics Unlimited took the time to gather together a thorough, day-by-day explanation of the processes which are occurring during the thirty day cycling process in a manner that is simple for even the amateur aquarium designer to understand. This explanation can be found at http://www.bestfish.com/newtank3.html It is common for brown algae to appear when a tank that has just been started. It typically puts in an appearance within the first two weeks. Its appearance in established tanks means that the aquarium owner needs to test the nitrate and phosphate levels of this tank. By the fifth day these first stage bacteria will have begun to metabolize the ammonia into nitrite. This process will be well established by the end of the first week. At the end of the second week ammonia levels will be completely safe for the fish and nitrites will be at their peak. From here until approximately day 27 the second stage bacteria will be working to begin metabolizing the nitrite to nitrate. By day 30 ammonia and nitrite levels should be all but non-existent as nitrate levels reach their peak and the bacterium are well able to handle maintaining the chemical composition of the water. This is an example of minimizing Mother Nature's perfect filtration system in order to provide your fish with the perfect habitat. Hopefully you have chosen to artificially stimulate the cycling process so that it is well established prior to inserting your fish. If you have not it is very important that you keep a very close eye on them while the tank is undergoing its cycling process. The spikes in ammonia and nitrite levels can be severely harmful to fish if they are exposed to it for too great a period of time, and they will likely begin to show signs of distress during these periods of the cycling process. If this becomes severe their conditions can be aided by changing a portion of the water in order to dilute the concentration of these products. There are a million different types of aquariums on the market, and with the number of choices available and the fact that there is no guaranteed formula for success for creating a saltwater aquarium it can be very difficult for individuals to choose which type of aquarium they should purchase. There are a number of factors which should be considered before the would be biologist ever sets foot inside a pet store. Live rocks, rocks which are covered with both micro- and macroorganisms which help to digest the waste produced by the fish, are a vital part of every natural ecosystem. For that reason it makes sense that they would be an important part of an aquarium environment as well. It is not as simple as dropping a rock into an aquarium and allowing all manner of things to grow on it, however. There is a process that must be followed to ensure optimal benefits for both the large aquarium and the live rock. It is very simple to cure live rock before placing it in the aquarium, but this is an important step that must be taken in order to prevent a build up of ammonia in the tank which could negatively affect the fish. To cure live rock first select a plastic container that is of a suitable size to hold the amount of live rock which you are working with, then fill it with saltwater. Then place a heater and water pump in the "tank" for optimal temperature and circulation. Once the water has reached the desired temperature remove the heater and pump and half of the water content, then preclean the rock in a bucket of saltwater by swishing it around to remove any lose organisms and debris and place it in the prepared water. Then reinstall the heater and pump and allow nature to do its thing! Purchase the largest, strongest algae glass cleaning magnet you can find and then use it. If you use the magnet each and every time you clean the water your tank the glass on your tank should stay algae free. Be sure to clean the magnet after each use. For particularly stubborn algae spots, you will have to use a razor blade. Don't forget to clean the overflow pipes.
Article Source: http://www.rightarticle.com
Thank you for showing interest in my article. For more information on aquarium care please visit aquariummania.info thanks once again for your time from your author Roger Gordon Don't reprint the same version as everyone else. Get your own unique content aquarium care article here.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
